铟镓砷磷半导体激光的生物特性及73例椎基底动脉供血不足者的治疗

通过对甸镓砷磷半导体激光和常用He-Ne激光生物特性进行初步比较,说明半导体激光对治疗椎基底动脉供血不足疗效较明显。     

以原子谱线作参考的半导体激光器的频率锁定

研究以原子谱线作参考的半导体激光器的频率锁定系统,在精密控制半导体激光器的工作温度和工作电流的基础上,利用85Rb的D2线的一次微分信号对LD的频率进行锁定.锁定后LD的频率最大变化为10MHz/3h,平均取样时间10s,用Alan方差估算LD频率稳定度为10-9.     

垂直腔激光器中弛豫振荡频率的优化控制

从垂直腔面发射的半导体激光器（VCSELs）的结构出发，利用增益与载流子密度的广义对数关系，借助小信号分析法，推出了直接调制情形下驰豫振荡频率的严格解析关系。分析指出，量子阱器件的光子寿命并非越短越好，欲提高VCSELs的驰豫振荡频率，除了增加注入电流，提高微分增益等基本途径外，控制器件的结构参数可使驰豫振荡频率达到极大值。同时，自发辐射因子的可控性，以及降低稳态载流子密度，也都是提高VCSELs驰豫振荡频率和拓宽调制带宽的有效措施。     

分布式制造动态调度资源集成系统建模

本文分析了分布式制造动态调度的本质，提出了对分布式制造资源集成系统的要求，并利用多A-gent理论对分布式制造资源集成系统进行建模，给出了系统集成的拓扑图和说明系统的信息流动过程，解决了构造分布式制造动态调度资源集成系统的理论基础。     

Magnetism in SiC implanted with high doses of Fe and Mn

High concentrations (0.1–5 at.%) of Mn or Fe were introduced into the near-surface region (≤2000 Å) of 6H-SiC substrates by direct implantation at ～300°C. After annealing at temperatures up to 1000°C, the structural properties were examined by transmission electron microscopy (TEM) and selected-area diffraction pattern (SADP) analysis. The magnetic properties were examined by SQUID magnetometry. While the Mn-implanted samples were paramagnetic over the entire dose range investigated, the Fe-implanted material displayed a ferromagnetic contribution present at <175 K for the highest dose conditions. No secondary phases were detected, at least not to the sensitivity of TEM or SADP.     

A hybrid PC/PLC architecture for manufacturing-system control—theory and implementation

This paper presents a novel and generic PC/PLC-based software/hardware architecture for the control of flexible manufacturing workcells. The proposed implementation methodology is based on the utilization of any one of the available formal discrete-event-system control theories in conjunction with state-of-the-art industrial programmable-logic controllers (PLCs). The methodology has been illustrated to be a viable technique through its actual implementation in our laboratory using a robotic-workcell testbed. The specific control theory used is a combination of Extended Moore Automata and Ramadge-Wonham Automata that has been developed by our research group. The modular control software architecture has been developed for MS-Windows environments (running on one PC interfaced to the PLCs) and allows the use of different formal control theories as well as different commercial PLC hardware. The effective graphical user interface provides a transparent programming environment, where users are not expected to have a full knowledge of the formal control theory used.     

展望21世纪的制造业及相关技术

综述了制造业未来的发展前景，重点分析了与制造业相关的制造系统、机械加工技术、生产组织形式、人员素质的发展趋势。     

柔性制造系统的托盘优化

本文讨论Job-shop型柔性制造系统的托盘优化问题,给出了求最小托盘数的算法,把托 盘优化问题化成了求解线性整数规划问题.     

分散网络制造浅谈

网络社会的制造业将是一个全球化的分散型的制造体系.分散网络制造是基于互联网的制造活动,因此,它具开放的、虚拟的,以及资源和技术更合理配置的特点.其组织模式是多种多样的,按现今国防工业现状,宜采用项目领导小组统一协调和控制下的分阶段动态联盟更为合适.为此,分析了网络无序化、企业属性知识不足、利益分配不易等问题带来的困难,并提出了一些建议.     

Spray forming technology for military applications

Over the past five years, the Annapolis Detachment, Carderock Division, Naval Surface Warfare Center (formerly David Taylor Research Center) has established a state- of- the- art spray forming facility for the study and exploitation of this near net shape manufacturing process. Spray forming is a single step gas atomization/deposition process which yields ferrous and nonferrous, near final shape, near fully dense preforms that has proven to be a viable and cost effective alternative to conventional metalworking technology for the production of material preforms with properties surpassing those of their cast and wrought counterparts. Current programs at Carderock Divison Naval Surface Warfare Center are aimed at optimization of the process, certification of the spray formed products and industrialization of the technology.